SC APC FTTH pre-bur fiber optic quick assembly fast connectors, 10pcs per pack, high quality and ROHS compliance
Applications
Broadband, CATV.
FTTH & FTTx;
Passive Optical Networks;
Features No epoxy and polishing required, No special tools needed when installed.
Low insertion loss and High return loss
Reliable, durability over 500 times mating
Easily installed, Quick and easy fiber termination in the field.
Fast connecting and repeat, No special tools needed when installed
Reliable, durability over 500 times mating
Low environmental sensitivity, adopt to complex environment
Field Assembly SC/PC fast connector for FTTH can provide a quick and easy termination of fibers in the field. Options are available for 900 micron allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels. This connector system removes any requirement for epoxy, adhesives or costly curing ovens and polishing and fibe ederface inspection.
| ITEM | Technical Parameters |
| Applicable for | Drop cable / Indoor cable |
| 0.9mm Tight Buffer Fiber, 2.0mm, 3.0mm Drop Cable |
| Optical fiber diameter | SM(9/125), MM(50/125, 62.5/125) |
| 125μm ( 657A & 657B ) |
| Tight buffer diameter | 250μm |
| Fiber mode | Single mode |
| Operation time | About 100s(no fiber cut) |
| Insert loss | ≤ 0.3dB(1310nm & 1550nm) |
| Return loss | > 50db(PC), > 55db(UPC), > 65db(APC) |
| Fastening strength of naked fiber | >5 N |
| Fastening strength of naked fiber holder | >10 N |
| Tensile strength | >50 N |
| Using temperature | -40~+75°C |
| On-line tensile strength (20 N) | IL ≤ 0.5dB RL ≤ 5dB |
| Mechanical durability (500 times) | IL ≤ 0.5dB RL ≤ 5dB |
| Drop-off test (drop-off height 4m,once per direction, totally 3 times) | IL ≤ 0.5dB RL ≤ 5dB |
