Shenzhen Unifiber Technology Co.,Ltd
Data Center Cabling|FTTx Network Solution|China OEM manufacture
Add to Cart
1x4 1x8 Mechanical Fiber Optic Switch 5V latching control 1550nm
1xN Mechanical Fiber Optic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fiberoptic switches are true switching solutions for optical networking applications.
| Features | Applications |
| Up to 128 channels | Ring network |
| Low insertion loss | Remote monitoring in optical network |
| Parallel interface | Testing of fiber optical component |
| Modularized design | |
| Epoxy free on optical path |
| Parameter | 1XN | |||
| Insertion Loss(dB) | 1＜N≤12 | 16＜N≤32 | 32＜N≤64 | 64＜N≤128 |
| Type:0.8 Max:1.0 | Type:0.8 Max:1.0 | Type:1.2 Max:1.5 | Type:1.7 Max:2.0 | |
| Wavelength Range(nm) | 850nm,1260~1620nm | |||
| Operating Wavelength(nm) | 850/1310/1550/1625 | |||
| WaveLength Dependent Loss(dB) | ≤0.25 | |||
| Channel Crosstalk(dB) | MM≥35 SM≥55 | |||
| Return Loss(dB) | MM≥30 SM≥50 | |||
| Polarization Dependent Loss(dB) | ≤0.05 | |||
| WaveLength Dependent Loss(dB) | ≤0.25 | |||
| Temperature Dependent Loss(dB) | ≤0.25 | |||
| Repeatability(dB) | ≤±0.02 | |||
| Power Supply(V) | 5.0 or 12.0 | |||
| Lifetime(time) | ≥10^7 | |||
| Switch Time(ms) | ≤8 | |||
| Transmission Power(mW) | ≤500 | |||
| Operating Temperature(℃) | -20~+70 | |||
| Storage Temperature(℃) | -40~+85 | |||
| Dimension(mm) | 1＜N≤12(135×64×32) | 12＜N≤16(184×78×36) | 16＜N≤32(140×77.5×64) | 31＜N≤88(184×156×66) |
| 88＜N≤128(184×220×66) | &nsbp; | &nsbp; | &nsbp; | |
1,Specifications may change without notice.
2,Above specification are for device without connector.
| Pin No. | signal Name | I/O | Description |
| 1 | D0 | Input | TTL,Channel selection bit 0 |
| 2 | D1 | Input | TTL,Channel selection bit 1 |
| 3 | D2 | Input | TTL,Channel selection bit 2 |
| 4 | D3 | Input | TTL,Channel selection bit 3 |
| 5 | /RESET | Input | TTL,Low level reset to channel 0.Highh leve means channel selection bits are effective. |
| 6 | /READY | Onput | TTL,Ready(High=Not ready,Low=Ready). |
| 7 | ERROR | Onput | TTL,Error(High=Error,Low=Not error). |
| 8 | GND | Input | Ground |
| 9 | +5VDC | Input | 5.0±5% VDC Power Supply(max 550mA) |
| Max Channel | Input | Active Channel | |||||||
| /RESET | D6 | D5 | D4 | D3 | D2 | D1 | D0 | ||
| N=16 | 0 | x | x | x | x | x | x | x | 0 reset |
| 1 | x | x | x | 0 | 0 | 0 | 0 | com → 1 | |
| x | x | x | 0 | 0 | 0 | 1 | com → 2 | ||
| x | x | x | 0 | 0 | 1 | 0 | com → 3 | ||
| x | x | x | ··· | ··· | ··· | ··· | ··· | ||
| x | x | x | 1 | 1 | 1 | 1 | com → 16 | ||
